Aircraft Kit-CASA CN-235
A complete kit for the CN-235 aircraft that provides premium protection to all sensitive components on the exterior of the aircraft.
The kit includes:
1) lanyard kit (Pitot covers, gear pin loop, and TAT cover), 1) DHAK DH adapter kit, and 2) Engine plug kits (installation pole, engine intake plugs, oil cooler plugs, engine exhaust plugs, oil cooler exhaust plugs, NACA vents, and engine kit storage bag).
- DuPont™ Nomex® and DuPont™ Kevlar® outer coverings
- All components are tethered together so no components are left on the aircraft during pre-flight
- Compression fit will not harm the aircraft in any way
- Does not require mechanical fasteners for installation or removal
- Working temperature of 600°F / 316°C
- Will not melt
- Completely pole installable
- Built-in removal loops
- Sesame waterproofing lamina prevents moisture and condensation buildup inside the orifices of the aircraft
- Acid and chemical resistant
- NAS1756 warning streamer is attached using a stainless steel cable
- Manufactured under ISO9001 and AS9100D quality assurance requirements
Aircraft Kit-C-27J Spartan
A complete kit for the C-27 aircraft that provides premium protection to all sensitive components on the exterior of the aircraft.
The kit includes:
1) Lanyard kit (Pitot covers, TAT covers, camera covers, ice detector cover, and air foil cover), 1) AC plug kit (by-pass plug, inlet plug and lanyard), 2) Engine plug kits (installation pole, main air plug, oil cooler plug, engine exhaust cover, ram air plug, FOD ejection plug, and lanyards to attach each), 1) APU kit (oil cooler plug, APU exhaust plug and lanyard), 2) Propeller lanyards with storage bag, 2) AOAC-2SPSD covers, 2) SPC101SPC27 static port covers, 4) Rope throw safety bags, 2) Engine kit security bags, and 1) accessory bag.
- DuPont™ Nomex® and DuPont™ Kevlar® outer coverings
- All components are tethered together so no components are left on the aircraft during pre-flight
- Compression fit will not harm the aircraft in any way
- Does not require mechanical fasteners for installation or removal
- Working temperature of 600°F / 316°C
- Will not melt
- Completely pole installable
- Built-in removal loops
- Sesame waterproofing lamina prevent moisture and condensation buildup inside the orifices of the aircraft
- Acid and chemical resistant
- NAS1756 warning streamer is attached using a stainless steel cable
- Manufactured under ISO9001 and AS9100D quality assurance requirements
APU-737-CAIP Auxiliary Power Unit Kit
The APU kit for the Boeing 737NG aircraft are constructed from DuPont™ Nomex® and other high temperature, fire retardant components.
The kit includes:
1) cooling air inlet cover, 1) exhaust port cover, and 1) side air inlet cover.
- DuPont Nomex® outer covering
- Compression fit will not harm the aircraft in any way
- Does not require mechanical fasteners for installation or removal
- Working temperature of 600°F / 316°C
- Will not melt
- Built-in removal loop with an optional pole install hub
- Sesame waterproofing lamina prevent moisture and condensation buildup inside the orifices of the aircraft
- Acid and chemical resistant
- NAS1756 warning streamer is attached using a stainless steel cable
- Manufactured under ISO9001 and AS9100D quality assurance requirements
KPC6 Series Pitot Probe Covers
Our patented KPC6 series Pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC6 cover will provide exceptional protection of the Pitot probe.
- Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe
- High temperature silicone rubber molding for easy attachment to Sesame’s commercial lanyards
- Working temperature of 850° F / 454°C
- Heat test temperature 1,150°F / 621°C
- Tight fit, factory set pull off resistance tested
- Flame-retardant (does not melt)
- Water repellant lamina
- Chemical/Abrasion resistance
- Metal-free/Low particulate
- Pole installable and removable
- NAS1756 approved warning streamer with part number identification
- Manufactured in an ISO Class 8 cleanroom
- Manufactured under ISO 9001 and AS9100D quality assurance requirements
- Meets CFR 25.853 requirements, test data is available upon request
- NSN assignment numbers available upon request
- Please contact Sesame Technologies or your local distributor for product fitment information
KPC5 Series Pitot Probe Covers
The patented KPC5 Pitot cover is designed to allow for ease of installation and removal for Pitot probes that are just out of reach from ground level. Constructed of DuPont™ Kevlar®, other polyaramid components, and high temperature silicones, the patented KPC5 cover will provide exceptional protection of the Pitot probe.
- Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe
- Molded installation rod provides easy installation and removal of the Pitot cover
- Working temperature of 850° F / 454°C
- Heat test temperature 1,150°F / 621°C
- Tight fit, factory set pull off resistance tested
- Flame-retardant (does not melt)
- Water repellant lamina
- Chemical/Abrasion resistance
- Metal-free/Low particulate
- NAS1756 approved warning streamer with part number identification
- Manufactured in an ISO Class 8 cleanroom
- Manufactured under ISO9001 and AS9100D quality assurance requirements
- NSN assignment numbers available upon request
- Please contact Sesame Technologies or your local distributor for product fitment information
KPC4T Series Pitot Probe Covers
The patented KPC4T series Pitot probe covers are specifically designed to offer the ultimate in Pitot probe and probe tip protection for aircraft utilizing the Collins Aerospace SmartProbe® Air Data System. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4T has an integrated probe tip protector for unparalleled performance.
- Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe
- Working temperature of 900° F / 482°C
- Heat test temperature 1,275°F / 691°C
- Tight fit, factory set pull off resistance tested
- Flame-retardant (does not melt)
- Water repellant lamina
- Chemical/Abrasion resistance
- Metal-free/Low particulate
- Removal loop
- NAS1756 approved warning streamer with part number identification
- Manufactured in an ISO Class 8 cleanroom
- Manufactured under ISO9001 and AS9100D quality assurance requirements
- Meets CFR 25.853 requirements, test data is available upon request
- Please contact Sesame Technologies or your local distributor for product fitment information
KPC4 Series Pitot Probe Covers
Our patented KPC4 series Pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont Kevlar® and other polyaramid components, the KPC4 cover will provide exceptional protection of the Pitot probe.
- Triple-layered DuPont Kevlar® construction will not scratch or damage the probe
- Working temperature of 850° F / 454°C
- Heat test temperature 1,150°F / 621°C
- Tight fit, factory set pull off resistance tested
- Flame-retardant (does not melt)
- Water repellant lamina
- Chemical/Abrasion resistance
- Metal-free/Low particulate
- Installation and removal loops
- Pole installable and removable
- NAS1756 approved warning streamer with part number identification
- Manufactured in an ISO Class 8 cleanroom
- Manufactured under ISO9001 and AS9100D quality assurance requirements
- Meets CFR 25.853 requirements, test data is available upon request
- IPC supplement is available upon request
- NSN assignment numbers available upon request
- Please contact Sesame Technologies or your local distributor for product fitment information
KPC3 Series Pitot Probe Covers
Our KPC3 series Pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont Kevlar® and other polyaramid components, the KPC3 cover will provide exceptional protection of the Pitot probe.
- Single-layered DuPont Kevlar® construction will not scratch or damage the probe.
- Working temperature of 800° F / 427°C
- Heat test temperature of 1,050°F / 566°C
- Tight fit, factory set pull off resistance tested
- Flame-retardant (does not melt)
- Water repellent lamina
- Chemical/Abrasion resistance
- Metal-free/Low particulate
- Installation and removal loops
- Pole installable and removable
- NAS1756 approved warning streamer with part number identification
- Manufactured in an ISO Class 8 cleanroom
- Manufactured under ISO9001 and AS9100D quality assurance requirements
- Meets CFR 25.853 requirements, test data is available upon request
- IPC supplement is available upon request
- NSN assignment numbers available upon request
- Please contact Sesame Technologies or your local distributor for product fitment information
