Signature Products | Sesame Technologies, Inc.Executive Products | Sesame Technologies, Inc.

Angle of Attack Vane covers

contact to order

R/C-AOAC-2 Angle of Attack Cover

A flame-resistant protective cover that minimizes potential vane damage on the Angle of Attack (AOA) sensor.

  • Cover is made of heavy gauge anodized aluminum and helps minimize potential vane deformation from use of maintenance items such as high-pressure hoses
  • Captive screws for easy installation and removal
  • Non-scratch, heat-resistant protective base
  • This cover will fit Rosemount & Gulton Statham (Conrac) vanes mounted on the following Boeing Airplanes: 737-600, 700, 800, 900, 747-400, 757, 767, 777, 787
  • Also fits on the following non-Boeing Aircraft: Lockheed Martin C130J
  • NAS1756 approved warning streamer with part number identification
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements
Contact To Order

R/C-AOAC-3 Angle of Attack Cover

A flame-resistant protective cover that minimizes potential vane damage on the Angle of Attack (AOA) sensor.

  • Cover is made of heavy gauge anodized aluminum and helps minimize potential vane deformation from use of maintenance items such as high-pressure hoses
  • Captive screws for easy installation and removal
  • Non-scratch, heat-resistant protective base
  • This cover will fit Rosemount & Gulton Statham (Conrac) vanes mounted on the following Boeing Airplanes: 727, 737-100, 200, 300, 400, 500, 747-100, -200, -300
  • NAS1756 approved warning streamer with part number identification number
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements
Contact To Order

R/C-AOAC-4 Angle of Attack Cover

A flame-resistant protective cover that minimizes potential vane damage on the Angle of Attack (AOA) sensor.

  • Cover is made of heavy gauge anodized aluminum and helps minimize potential vane deformation from use of maintenance items such as high-pressure hoses
  • Captive screws for easy installation and removal
  • Non-scratch, heat-resistant protective base
  • This cover will fit Rosemount & Gulton Statham (Conrac) vanes mounted on the following Boeing Airplanes: 737-600, 700, 800, 900, 747-400, 757, 767, 777, 787
  • Also fits on the following non-Boeing Aircraft: Lockheed Martin C130J
  • NAS1756 approved warning streamer with part number identification
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements
Contact To Order

R/C-AOAC-2SPSD Angle of Attack Cover

A severe duty flame-resistant protective cover that minimizes potential vane damage on the Angle of Attack (AOA) sensor. The cover is vented to allow for heat dissipation.

  • Fully enclosed protection for severe duty applications where ice, snow, blowing debris, and other hazards are present
  • DuPont™ Nomex® cover with positively attached flame-retardant hook and loop fasteners allow interior access for installation and removal
  • Made of heavy gauge anodized aluminum and helps minimize potential vane deformation from use of maintenance items such as high-pressure hoses
  • Non-scratch, heat-resistant protective base
  • NAS1756 approved warning streamer with part number identification number
  • This cover will fit Rosemount & Gulton Statham (Conrac) vanes mounted on the following Boeing Airplanes: 737-600, 700, 800, 900, 747-400, 757, 767, 777, 787
  • Manufactured under ISO9001 and AS9100D quality assurance requirements
Contact To Order
Performance Level:
Gold

KPC6 Series Pitot Probe Covers

Our patented KPC6 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC6 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • High temperature silicone rubber molding for easy attachment to Sesame’s commercial lanyards.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC5 Series Pitot Probe Covers

The patented KPC5 pitot cover is designed to allow for ease of installation and removal for pitot probes that are just out of reach from ground level. Constructed of DuPont™ Kevlar®, other polyaramid components, and high temperature silicones, the patented KPC5 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Molded installation rod provides easy installation and removal of the pitot cover.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Platinum

KPC4T Series Pitot Probe Covers

The patented KPC4T series pitot probe covers are specifically designed to offer the ultimate in pitot probe and probe tip protection for aircraft utilizing the Collins Aerospace SmartProbe® Air Data System. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4T has an integrated probe tip protector for unparalleled performance.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 900° F / 482°C.
  • Heat test temperature of 1,275°F / 691°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Removal loop.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC4 Series Pitot Probe Covers

Our patented KPC4 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4 cover will provide exceptional protection of the pitot probe.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom .
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Silver

KPC3 Series Pitot Probe Covers

Our KPC3 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC3 cover will provide exceptional protection of the pitot probe.

  • Single-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 800° F / 427°C.
  • Heat test temperature of 1,050°F / 566°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellent lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Executive Products | Sesame Technologies, Inc.
Contact to Order
MW75 Neuro | Neurable