Diamond Engine Shield EX - Horizontal Intake
- The Diamond Engine Shield EX is an engine protection device that is designed to be safely installed by a single crew member from ground level.
- The horizontal shield is designed for aircraft that do not offer vertical installation access, including those with wing-mounted engines or with aft-mounted engines overhanging the wing.
- Constructed of premium raw materials such as carbon fiber, high temperature silicones, 316L stainless steel, and with a synthetic outer layer, the Diamond Engine Shield EX is robust and durable enough to withstand extreme conditions.
- Auto-centering on the leading edge of the engine with high-temperature silicone cushioning pads, the Diamond Engine Shield EX easily secures to the engine nacelle with no fasteners required.
- The unique design of the bell mouth handle provides a secure connection point between the Diamond Engine Shield EX and the IP100-EX installation Pole.
- The front bell mouth portion is equipped with a white glow-in-the-dark silicone pad for ease of locating the engagement point during nighttime operations. The pad doubles as a protective layer in case of accidental mishandling of the shield.
- The Diamond Engine Shield EX cannot detach from the IP100-EX installation Pole until the user disengages the unique locking head.
- Pre-fitted with positive attachments for Sesame Technologies’ Safety Lanyard System, ensuring a secure connection with all Executive Series GSE products.
- The Diamond Engine Shield EX is completely collapsible and secured with a cinching strap for quick and easy storage. Each shield includes a micro installation tool.
- Manufactured under ISO9001 and AS9100D quality assurance requirements.
- Outfitted with a NAS1756 approved warning streamer.
- Wind, Water, and Impact tested.
- Patent Pending.
- Please contact Sesame Technologies, Inc. or your local distributor for product fitment information.
Diamond Engine Shield EX - Horizontal Exhaust
- The Diamond Engine Shield EX is an engine protection device that is designed to be safely installed by a single crew member from ground level.
- The horizontal shield is designed for aircraft that do not offer vertical installation access, including those with wing-mounted engines or with aft-mounted engines overhanging the wing.
- The exhaust shield is specifically designed for aircraft engine exhaust protection due to its unique feet, which match the steep curvature of the exhaust walls.
- Constructed of premium raw materials such as carbon fiber, high temperature silicones, 316L stainless steel, and with a synthetic outer layer, the Diamond Engine Shield EX is robust and durable enough to withstand extreme conditions.
- Auto-centering on the leading edge of the engine with high-temperature silicone cushioning pads, the Diamond Engine Shield EX easily secures to the engine nacelle with no fasteners required.
- The unique design of the bell mouth handle provides a secure connection point between the Diamond Engine Shield EX and the IP100-EX installation Pole.
- The front bell mouth portion is equipped with a white glow-in-the-dark silicone pad for ease of locating the engagement point during nighttime operations. The pad doubles as a protective layer in case of accidental mishandling of the shield.
- The Diamond Engine Shield EX cannot detach from the IP100-EX installation Pole until the user disengages the unique locking head.
- Pre-fitted with positive attachments for Sesame Technologies’ Safety Lanyard System, ensuring a secure connection with all Executive Series GSE products.
- The Diamond Engine Shield EX is completely collapsible and secured with a cinching strap for quick and easy storage. Each shield includes a micro installation tool.
- Manufactured under ISO9001 and AS9100D quality assurance requirements.
- Outfitted with a NAS1756 approved warning streamer.
- Wind, Water, and Impact tested.
- Patent Pending.
- Please contact Sesame Technologies, Inc. or your local distributor for product fitment information.
Performance Level:
Gold
KPC6 Series Pitot Probe Covers
Our patented KPC6 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC6 cover will provide exceptional protection of the pitot probe.
- Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
- High temperature silicone rubber molding for easy attachment to Sesame’s commercial lanyards.
- Working temperature of 850° F / 454°C.
- Heat test temperature of 1,150°F / 621°C.
- Tight fit, factory set pull off resistance tested.
- Flame-retardant (does not melt).
- Water repellant lamina.
- Chemical/Abrasion resistance.
- Metal-free/Low particulate.
- Pole installable and removable.
- NAS1756 approved warning streamer with part number identification.
- Manufactured in an ISO Class 8 cleanroom.
- Manufactured under ISO 9001 and AS9100D quality assurance requirements.
- Meets CFR 25.853 requirements, test data is available upon request.
- NSN assignment numbers available upon request.
- Please contact Sesame Technologies or your local distributor for product fitment information.
Performance Level:
Gold
KPC5 Series Pitot Probe Covers
The patented KPC5 pitot cover is designed to allow for ease of installation and removal for pitot probes that are just out of reach from ground level. Constructed of DuPont™ Kevlar®, other polyaramid components, and high temperature silicones, the patented KPC5 cover will provide exceptional protection of the pitot probe.
- Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
- Molded installation rod provides easy installation and removal of the pitot cover.
- Working temperature of 850° F / 454°C.
- Heat test temperature of 1,150°F / 621°C.
- Tight fit, factory set pull off resistance tested.
- Flame-retardant (does not melt).
- Water repellant lamina.
- Chemical/Abrasion resistance.
- Metal-free/Low particulate.
- NAS1756 approved warning streamer with part number identification.
- Manufactured in an ISO Class 8 cleanroom.
- Manufactured under ISO 9001 and AS9100D quality assurance requirements.
- NSN assignment numbers available upon request.
- Please contact Sesame Technologies or your local distributor for product fitment information.
Performance Level:
Platinum
KPC4T Series Pitot Probe Covers
The patented KPC4T series pitot probe covers are specifically designed to offer the ultimate in pitot probe and probe tip protection for aircraft utilizing the Collins Aerospace SmartProbe® Air Data System. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4T has an integrated probe tip protector for unparalleled performance.
- Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
- Working temperature of 900° F / 482°C.
- Heat test temperature of 1,275°F / 691°C.
- Tight fit, factory set pull off resistance tested.
- Flame-retardant (does not melt).
- Water repellant lamina.
- Chemical/Abrasion resistance.
- Metal-free/Low particulate.
- Removal loop.
- NAS1756 approved warning streamer with part number identification.
- Manufactured in an ISO Class 8 cleanroom.
- Manufactured under ISO 9001 and AS9100D quality assurance requirements.
- Meets CFR 25.853 requirements, test data is available upon request.
- Please contact Sesame Technologies or your local distributor for product fitment information.
Performance Level:
Gold
KPC4 Series Pitot Probe Covers
Our patented KPC4 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4 cover will provide exceptional protection of the pitot probe.
- Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
- Working temperature of 850° F / 454°C.
- Heat test temperature of 1,150°F / 621°C.
- Tight fit, factory set pull off resistance tested.
- Flame-retardant (does not melt).
- Water repellant lamina.
- Chemical/Abrasion resistance.
- Metal-free/Low particulate.
- Installation and removal loops.
- Pole installable and removable.
- NAS1756 approved warning streamer with part number identification.
- Manufactured in an ISO Class 8 cleanroom .
- Manufactured under ISO 9001 and AS9100D quality assurance requirements.
- Meets CFR 25.853 requirements, test data is available upon request.
- IPC supplement is available upon request.
- NSN assignment numbers available upon request.
- Please contact Sesame Technologies or your local distributor for product fitment information.
Performance Level:
Silver
KPC3 Series Pitot Probe Covers
Our KPC3 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC3 cover will provide exceptional protection of the pitot probe.
- Single-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
- Working temperature of 800° F / 427°C.
- Heat test temperature of 1,050°F / 566°C.
- Tight fit, factory set pull off resistance tested.
- Flame-retardant (does not melt).
- Water repellent lamina.
- Chemical/Abrasion resistance.
- Metal-free/Low particulate.
- Installation and removal loops.
- Pole installable and removable.
- NAS1756 approved warning streamer with part number identification.
- Manufactured in an ISO Class 8 cleanroom.
- Manufactured under ISO 9001 and AS9100D quality assurance requirements.
- Meets CFR 25.853 requirements, test data is available upon request.
- IPC supplement is available upon request.
- NSN assignment numbers available upon request.
- Please contact Sesame Technologies or your local distributor for product fitment information.
