Signature Products | Sesame Technologies, Inc.Executive Products | Sesame Technologies, Inc.

Installation Tools

contact to order

IP100, Installation Pole, 2 pc, 80"-152"

Durable, yet lightweight pole allows the installation of our pitot probe covers with limited use of ladders or man lifts. Personnel stay safely on the ground and easily install or remove covers.

  • Durable non-corrosive anodized aluminum pole.
  • Telescoping pole retracts for easy storage.
  • Tool extends from 80″ to 152.″
  • ‍Custom lengths available.
  • Delrin stand-off prevents metal to metal contact.
  • Lightweight aluminum pole and head construction weighs only 3.4 pounds.
  • Mechanical clutch ensures telescoping pole will not slip length.
  • Mechanical stop ensures the pole halves will not separate.
  • Soft alloy “vertical uprights” designed to yield preventing damage to the probe or aircraft.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Patented design.
Contact To Order

IP100-SP24, Installation Pole Special 24"

Developed for Regional and business aircraft – the smaller, stowable IP100-SP24 offers a fixed length pitot probe cover installation tool option.

‍

  • Durable non-corrosive anodized aluminum pole.
  • Tool is approximately 24″ in length.
  • ‍Custom lengths available.
  • Delrin stand-off prevents metal to metal contact.
  • Lightweight aluminum pole and head construction weighs only 1.5 pounds.
  • Soft alloy “vertical uprights” designed to yield preventing damage to the probe or aircraft.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Patented design.
Contact To Order

IP100-SP39-72, Installation Pole Special, 2 pc, 39"-72"

Durable, yet lightweight pole allows the installation of our pitot probe covers with limited use of ladders or man lifts. Personnel stay safely on the ground and easily install or remove covers.

‍

  • Durable non-corrosive anodized aluminum pole.
  • Telescoping pole retracts for easy storage.
  • Tool extends from 39″ to 72.″
  • ‍Custom lengths available.
  • Delrin stand-off prevents metal to metal contact.
  • Lightweight aluminum pole and head construction weighs only 3 pounds.
  • Mechanical clutch ensures telescoping pole will not slip length.
  • Mechanical stop ensures the pole halves will not separate.
  • Soft alloy “vertical uprights” designed to yield preventing damage to the probe or aircraft.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Patented design.
Contact To Order

IP100-SP46-82, Installation Pole Special, 2 pc, 46"-82"

Durable, yet lightweight pole allows the installation of our pitot probe covers with limited use of ladders or man lifts. Personnel stay safely on the ground and easily install or remove covers.

‍

  • Durable non-corrosive anodized aluminum pole.
  • Telescoping pole retracts for easy storage.
  • Tool extends from 46″ to 82.″
  • ‍Custom lengths available.
  • Delrin stand-off prevents metal to metal contact.
  • Lightweight aluminum pole and head construction weighs only 3 pounds.
  • Mechanical clutch ensures telescoping pole will not slip length.
  • Mechanical stop ensures the pole halves will not separate.
  • Soft alloy “vertical uprights” designed to yield preventing damage to the probe or aircraft.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Patented design.
Contact To Order

IP100SP57-108 Installation Tool

Durable, yet lightweight pole allows the installation of our pitot probe covers with limited use of ladders or man lifts. Personnel stay safely on the ground and easily install or remove covers.

‍

  • Durable non-corrosive anodized aluminum pole.
  • Telescoping pole retracts for easy storage.
  • Tool extends from 57″ to 108.″
  • ‍Custom lengths available.
  • Delrin stand-off prevents metal to metal contact.
  • Lightweight aluminum pole and head construction weighs only 3.2 pounds.
  • Mechanical clutch ensures telescoping pole will not slip length.
  • Mechanical stop ensures the pole halves will not separate.
  • Soft alloy “vertical uprights” designed to yield preventing damage to the probe or aircraft.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Patented design.
Contact To Order

IP100-XL, Installation Pole with XL head, 2 pc, 80"-152"

Durable, yet lightweight pole allows the installation of our pitot probe covers with limited use of ladders or man lifts. Personnel stay safely on the ground and easily install or remove covers.

‍

  • Durable non-corrosive anodized aluminum pole with extra-long anodized aluminum head.
  • Telescoping pole retracts for easy storageTool extends from 80″ to 152.″
  • ‍Custom lengths available.
  • Delrin stand-off prevents metal to metal contact.
  • Lightweight aluminum pole and head construction weighs only 3 pounds.
  • Mechanical clutch ensures telescoping pole will not slip length.
  • Mechanical stop ensures the pole halves will not separate.
  • Soft alloy “vertical uprights” designed to yield preventing damage to the probe or aircraft.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Patented design.
Contact To Order
Performance Level:
Gold

KPC6 Series Pitot Probe Covers

Our patented KPC6 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC6 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • High temperature silicone rubber molding for easy attachment to Sesame’s commercial lanyards.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC5 Series Pitot Probe Covers

The patented KPC5 pitot cover is designed to allow for ease of installation and removal for pitot probes that are just out of reach from ground level. Constructed of DuPont™ Kevlar®, other polyaramid components, and high temperature silicones, the patented KPC5 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Molded installation rod provides easy installation and removal of the pitot cover.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Platinum

KPC4T Series Pitot Probe Covers

The patented KPC4T series pitot probe covers are specifically designed to offer the ultimate in pitot probe and probe tip protection for aircraft utilizing the Collins Aerospace SmartProbe® Air Data System. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4T has an integrated probe tip protector for unparalleled performance.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 900° F / 482°C.
  • Heat test temperature of 1,275°F / 691°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Removal loop.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC4 Series Pitot Probe Covers

Our patented KPC4 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4 cover will provide exceptional protection of the pitot probe.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom .
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Silver

KPC3 Series Pitot Probe Covers

Our KPC3 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC3 cover will provide exceptional protection of the pitot probe.

  • Single-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 800° F / 427°C.
  • Heat test temperature of 1,050°F / 566°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellent lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Executive Products | Sesame Technologies, Inc.
Contact to Order
MW75 Neuro | Neurable