Signature Products | Sesame Technologies, Inc.Executive Products | Sesame Technologies, Inc.

Lanyard Systems

contact to order

KPLK-ATR-42 DuPont Kevlar® Pitot Lanyard Kit

The KPLK-ATR-42 Pitot Lanyard positively attaches the TAT (Total Air Temperature) cover and pitot probe covers to assure the removal of all pitot probe covers prior to flight operations.

  • Heat-resistant DuPont™ Kevlar® construction (tear and cut resistant).
  • DuPont™ Kevlar® braid loop securely fastens pitot probe and TAT covers to lanyard.
  • Individual pieces may be easily replaced as needed.
  • Non-abrasive, metal-free DuPont™ Kevlar® will not scratch pitot probe or damage aircraft skin and paint.
  • Brightly colored for easy identification against aircraft skin.
  • Water repellent.
  • NAS approved warning streamer with part number identification.
  • Patented design.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

KPLK-ATR-72 DuPont Kevlar® Pitot Lanyard Kit

The KPLK-ATR-72 Pitot Lanyard positively attaches the pitot probe covers to assure the removal of all pitot probe covers prior to flight operations.

  • Heat-resistant DuPont™ Kevlar® construction (tear and cut resistant).
  • DuPont™ Kevlar® braid loop securely fastens pitot probe covers to lanyard.
  • Individual pieces may be easily replaced as needed.
  • Non-abrasive, metal-free Kevlar® will not scratch pitot probe or damage aircraft skin and paint.
  • Brightly colored for easy identification against aircraft skin.
  • Water repellent.
  • NAS approved warning streamer with part number identification.
  • Patented design.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

KPLK-C130H DuPont Kevlar® Pitot Lanyard Kit

The KPLK-C130H Kevlar® Pitot Lanyard kit positively attaches the KPC5 covers for all forward pitot probes to the forward gear nose pin to assure the removal of all pitot probe covers prior to flight operations.

  • Heat-resistant DuPont™ Kevlar® construction (tear and cut resistant).
  • DuPont™ Kevlar® braid loop securely fastens pitot probe covers to lanyard providing easy cover replacement.
  • High-temperature silicone rubber molding provides durable attachment points for pitot cover and installation rod.
  • Non-abrasive Kevlar® and Nomex® will not scratch or damage aircraft skin or paint.
  • Brightly colored for easy identification against aircraft skin.
  • NAS approved warning streamer with part number identification.
  • Patented design.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

KPLK-C130J DuPont Kevlar® Pitot Lanyard Kit

The KPLK-C130J DuPont™ Kevlar® Pitot Lanyard kit positively attaches the KPC6 covers for all forward pitot probes to the forward gear nose pin to assure the removal of all pitot probe covers prior to flight operations.

  • Heat-resistant DuPont™ Kevlar® construction (tear and cut resistant).
  • DuPont™ Kevlar® braid loop securely fastens pitot covers to lanyard providing easy cover replacement.
  • High-temperature silicone rubber molding provides durable attachment points for pitot cover and installation rod.
  • Non-abrasive DuPont™ Kevlar® and DuPont™ Nomex® will not scratch or damage aircraft skin or paint.
  • Brightly colored for easy identification against aircraft skin.
  • NAS approved warning streamer with part number identification.
  • Patented design.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

KPLK-HC144 DuPont Kevlar® Pitot Lanyard Kit

The KPLK-HC144 DuPont™Kevlar® Pitot Lanyard kit positively attaches the KPC6 covers and FTC-101 TAT cover for all forward pitot probes and total air temperature sensor to the forward gear nose pin to assure the removal of all pitot probe covers prior to flight operations.

  • Heat-resistant DuPont™ Kevlar® construction (tear and cut resistant).
  • DuPont™ Kevlar® braid loop securely fastens pitot covers to lanyard providing easy cover replacement.
  • High-temperature silicone rubber molding provides durable attachment points for pitot cover and installation rod.
  • Non-abrasive DuPont™ Kevlar® and DuPont™ Nomex® will not scratch or damage aircraft skin or paint.
  • Brightly colored for easy identification against aircraft skin.
  • NAS approved warning streamer with part number identification.
  • Patented design.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order
Performance Level:
Gold

KPC6 Series Pitot Probe Covers

Our patented KPC6 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC6 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • High temperature silicone rubber molding for easy attachment to Sesame’s commercial lanyards.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC5 Series Pitot Probe Covers

The patented KPC5 pitot cover is designed to allow for ease of installation and removal for pitot probes that are just out of reach from ground level. Constructed of DuPont™ Kevlar®, other polyaramid components, and high temperature silicones, the patented KPC5 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Molded installation rod provides easy installation and removal of the pitot cover.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Platinum

KPC4T Series Pitot Probe Covers

The patented KPC4T series pitot probe covers are specifically designed to offer the ultimate in pitot probe and probe tip protection for aircraft utilizing the Collins Aerospace SmartProbe® Air Data System. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4T has an integrated probe tip protector for unparalleled performance.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 900° F / 482°C.
  • Heat test temperature of 1,275°F / 691°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Removal loop.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC4 Series Pitot Probe Covers

Our patented KPC4 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4 cover will provide exceptional protection of the pitot probe.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom .
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Silver

KPC3 Series Pitot Probe Covers

Our KPC3 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC3 cover will provide exceptional protection of the pitot probe.

  • Single-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 800° F / 427°C.
  • Heat test temperature of 1,050°F / 566°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellent lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Executive Products | Sesame Technologies, Inc.
Contact to Order
MW75 Neuro | Neurable