Special Application Covers

A flame-resistant protective cover that eliminates potential damage to the pitot probe. The cover provides protection from water, debris, and wind damage.

• DuPont™ Nomex® construction.
• Temperature tolerance of 800°F.
• Flame retardant (does not melt).
• Water repellent / weather tolerant.
• Metal free (soft flexibility ensures a tight fit without scratching the sensor).
• NAS1756 approved warning streamer with part number identification.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.

A flame-retardant DuPont™ Nomex® protective cover that reduces potential damage to the antenna. The cover secures the antenna to prevent wind and contact damage. Cover does not put any stress or strain on the antenna.

• DuPont™ Nomex® construction.
• Temperature tolerance of 800°F / 427°C.
• Flame-retardant (does not melt).
• Chemical / abrasion resistance.
• Water repellent / weather tolerant.
• NAS17560 approved warning streamer with part number identification.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.

A flame-retardant DuPont™ Nomex® protective cover that eliminates potential damage on the test boom sensor. The cover secures vanes to prevent wind or contact damage. The cover does not put any stress or strain on the vane shafts or bearings.

• Temperature tolerance of 800°F / 427°C.
• Flame-retardant (does not melt).
• Chemical / abrasion resistance.
• Water repellent / weather tolerant.
• Flag attachment made from braided orange DuPont™ Kevlar® tape.
• NAS1756 approved warning streamer with part number identification.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.

A flame-retardant DuPont™ Nomex® protective cover with a specialized probe tip insert. A Kevlar® sleeved, high-temperature silicone rubber pitot insert protects the probe tip from damage. The cover also protects the Multi-Function Probe from water, debris, and wind damage.

• DuPont™ Nomex® and DuPont™ Kevlar® construction (metal free).
• Designed to fit the Airbus A350 and A380 MFP sensor.
• Internal mounted pressed DuPont™ Nomex® board spines provide support to the AOA vane.
• Temperature tolerance of 800°F / 427°C.
• Flame-retardant (does not melt).
• Chemical / abrasion resistance.
• Water repellent / weather tolerant.
• Flag attachment made from braided orange Kevlar® tape.
• NAS1756 approved warning streamer with part number identification.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.

A flame-retardant vinyl and DuPont™ Nomex® protective cover for the Gulfstream GII – GV Drain Mast. The cover helps to protect against direct contact with the drain mast during routine maintenance.

• Red DuPont™ Nomex® interior liner is heat resistant and will not scratch the drain mast.
• Heavy-duty red laminated vinyl is highly visible.
• Flame retardant (does not melt).
• Working temperature to 800°F / 427°C.
• Water repellent / Weather tolerant.
• NAS1756 approved warning streamer with part number identification.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.

A flame-retardant vinyl and DuPont™ Nomex® protective cover for the Boeing 737NG Drain Mast. The cover helps to protect against direct contact with the drain mast during routine maintenance.

• Red DuPont™ Nomex® interior liner is heat resistant and will not scratch the drain mast.
• Heavy-duty yellow laminated vinyl is highly visible.
• Flame retardant (does not melt).
• High working temperature.
• Water repellent / Weather tolerant.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.

A flame-resistant protective cover that minimizes potential damage to the moisture content sensor. Bulb shaped front prevents any contact with the delicate sensors. Designed to protect crew members from heat-related injuries associated with moisture content sensors.

• Prevents potential sensor damage during maintenance
• Prevents personnel contact during heat cycle
• Prevents FOD intrusion
• Lightweight anodized aluminum body
• High-temperature silicone rubber cushion liner prevents metal to metal contact
• Designed for specific applications, please contact us for application requirements
• NAS1756 approved warning streamer with part number identification
• Manufactured under ISO 9001 and AS9100D quality assurance requirements
• Meets CFR 25.853 requirements, test data is available upon request
• Please contact Sesame Technologies or your local distributor for product fitment information

A specialized high-temperature protective cover that eliminates potential damage to aircraft avionics sensors.

• DuPont™ Nomex® outer covering.
• Working temperature tolerance of 800°F / 427°C.
• Interior slip resistant channels ensure the cover remains in place.
• Flame retardant, does not melt.
• Chemical and abrasion resistant.
• Extreme weather tolerant.
• Water repellent.
• Soft flexibility ensures a tight fit without scratching the sensor in any way.
• NAS1756 warning streamer attached with a stainless steel cable.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.

The Stall Sensor cover is designed to protect the stall sensor from damage or FOD intrusion during ground maintenance or storage of the aircraft.

• Universal design to fit most aircraft.
• Lightweight constructions.
• Attaches with heavy-duty lever cup designed to hold with 40-pounds of removal force.
• No fuselage modification required.
• Minimizes the possibility of damage to stall sensor port.
• Malleable light gauge anodized aluminum easily conforms to virtually any surface.
• Adjustable to allow for attaching lever cup on or around decals and pin striping.
• Installed at temperatures from -20°F to 220°F.
• Identification numbers or logos may be printed on parts or warning streamers.
• NAS1756 approved warning streamer with part number identification.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.

A flame-resistant protective cover that minimizes potential damage to aircraft mounted camera lens.

• Prevents potential camera and lens damage during maintenance.
• Tight fit prevents water and FOD intrusion.
• High-temperature silicone construction.
• Application specific.
• NAS1756 approved warning streamer with part number identification.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Please contact Sesame Technologies or your local distributor for product fitment information.

• Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
• Working temperature of 850° F / 454°C.
• Heat test temperature 1,150°F / 621°C.
• Flame-retardant (does not melt).
• Water repellant lamina.
• Chemical/Abrasion resistance.
• Metal-free/Low particulate.
• NAS1756 approved warning streamer with part number identification.
• Manufactured in an ISO Class 8 cleanroom.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.

• DuPont™ Nomex® outer coveringWorking temperature tolerance of 800°F / 427°C.
• Interior slip resistant channels ensure the cover remains in place.
• Flame-retardant, does not melt.
• Chemical and abrasion resistant.
• Extreme weather tolerant.
• Water repellant lamina.
• Soft flexibility ensures a tight fit without scratching the sensor in any way.
• NAS1756 warning streamer attached with a stainless steel cable.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.

• Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
• Working temperature of 850° F / 454°C.
• Heat test temperature 1,150°F / 621°C.
• Flame-retardant (does not melt).
• Water repellant lamina.
• Chemical/Abrasion resistant.
• Metal-free/Low particulate.
• NAS1756 approved warning streamer with part number identification.
• Manufactured in an ISO Class 8 cleanroom.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.

• Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
• Working temperature of 850° F / 454°C.
• Heat test temperature 1,150°F / 621°C.
• Flame-retardant (does not melt).
• Water repellant lamina.
• Chemical/Abrasion resistant.
• Metal-free/Low particulate.
• NAS1756 approved warning streamer with part number identification.
• Manufactured in an ISO Class 8 cleanroom.
• Manufactured under ISO 9001 and AS9100D quality assurance requirements.
• Meets CFR 25.853 requirements, test data is available upon request.
• Please contact Sesame Technologies or your local distributor for product fitment information.