Signature Products | Sesame Technologies, Inc.Executive Products | Sesame Technologies, Inc.

Static Port Covers

contact to order

SPC-101, Static Port Cover, 1 Port

The SPC-101 Cover is designed to protect the static ports from damage during routine ground maintenance or storage of the aircraft.

  • Universal design to fit most aircraft
  • Lightweight – entire assembly weighs less than one half a pound
  • Attaches with heavy-duty lever cups designed to hold with 40-pounds of removal force
  • No fuselage modification required
  • Minimizes the possibility of damage to static ports by being an externally mounted cover
  • Malleable light gauge anodized aluminum easily conforms to virtually any surface
  • Adjustable to allow for attaching lever cups on or around decals and pin striping
  • Installed at temperatures from -20°F to 220°F
  • Identification numbers or logos may be printed on parts or warning streamers
  • NAS1756 approved warning streamer with part number identification
  • Manufactured under ISO9001 and AS9100D quality assurance requirements
Contact To Order

SPC-102, Static Port Cover, 2 Ports

The SPC-102 Cover is designed to protect the static ports from damage during routine ground maintenance or storage of the aircraft.

  • Universal design to fit most aircraft
  • Lightweight – entire assembly weighs less than one half a pound
  • Attaches with heavy-duty lever cups designed to hold with 40-pounds of removal force
  • No fuselage modification required
  • Minimizes the possibility of damage to static ports by being an externally mounted cover
  • Malleable light gauge anodized aluminum easily conforms to virtually any surface
  • Adjustable to allow for attaching lever cups on or around decals and pin striping
  • Installed at temperatures from -20°F to 220°F
  • Identification numbers or logos may be printed on parts or warning streamers
  • NAS1756 approved warning streamer with part number identification
  • Manufactured under ISO9001 and AS9100D quality assurance requirements
Contact To Order

SPC-101SPF Static Port Cover

The SPC-101SPF Cover is designed to protect the static ports from damage during routine ground maintenance or storage of the aircraft.

  • Durable epoxy resin coated fiberglass laminate construction
  • Universal design to fit most aircraft
  • Lightweight – entire assembly weighs less than one half a pound
  • Attaches with heavy-duty lever cups designed to hold with 40-pounds of removal force
  • No fuselage modification required
  • Minimizes the possibility of damage to static ports by being an externally mounted cover
  • Adjustable to allow for attaching lever cups on or around decals and pin striping
  • Installed at temperatures from -20°F to 220°F
  • Identification numbers or logos may be printed on parts or warning streamers
  • NAS1756 approved warning streamer with part number identification
  • Manufactured under ISO9001 and AS9100D quality assurance requirements
Contact To Order

SPC-102SP-H60, Static Port Cover (Special Purpose)

An innovative solution for static port protection. The SPC-102SP-H60 is designed of fiberglass and stainless steel. It is designed to protect the static port system from foreign debris. The SPC-102SP-H60 has the following characteristics.

  • Lightweight construction
  • Universal design to fit most aircraft
  • Attaches with heavy-duty lever cups designed to hold with 40-pounds of removal force
  • No fuselage modification required
  • Minimizes the possibility of damage to static ports by being an externally mounted cover
  • Red anodize and red polane outer coatings
  • Adjustable to allow for attaching lever suction cups on or around decals and pin striping
  • Installed at temperatures from -20°F to 220°F
  • NAS1756 approved warning streamer with part number identification
  • Manufactured under ISO9001 and AS9100D quality assurance requirements
Contact To Order
Performance Level:
Gold

KPC6 Series Pitot Probe Covers

Our patented KPC6 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC6 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • High temperature silicone rubber molding for easy attachment to Sesame’s commercial lanyards.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC5 Series Pitot Probe Covers

The patented KPC5 pitot cover is designed to allow for ease of installation and removal for pitot probes that are just out of reach from ground level. Constructed of DuPont™ Kevlar®, other polyaramid components, and high temperature silicones, the patented KPC5 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Molded installation rod provides easy installation and removal of the pitot cover.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Platinum

KPC4T Series Pitot Probe Covers

The patented KPC4T series pitot probe covers are specifically designed to offer the ultimate in pitot probe and probe tip protection for aircraft utilizing the Collins Aerospace SmartProbe® Air Data System. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4T has an integrated probe tip protector for unparalleled performance.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 900° F / 482°C.
  • Heat test temperature of 1,275°F / 691°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Removal loop.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC4 Series Pitot Probe Covers

Our patented KPC4 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4 cover will provide exceptional protection of the pitot probe.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom .
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Silver

KPC3 Series Pitot Probe Covers

Our KPC3 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC3 cover will provide exceptional protection of the pitot probe.

  • Single-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 800° F / 427°C.
  • Heat test temperature of 1,050°F / 566°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellent lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Executive Products | Sesame Technologies, Inc.
Contact to Order
MW75 Neuro | Neurable