Signature Products | Sesame Technologies, Inc.Executive Products | Sesame Technologies, Inc.

Total Air Temperature Sensor Covers

contact to order

FTC-102 Total Air Temperature Sensor Cover

A flame-resistant protective cover that eliminates potential damage to the total air temperature sensor. The cover provides protection from water, debris, and wind damage. Boeing and Rosemount tested and approved.

  • DuPont™ Nomex® construction.
  • Temperature tolerance of 800°F.
  • Flame retardant (does not melt).
  • Water repellent / weather tolerant.
  • Metal free (soft flexibility ensures a tight fit without scratching the sensor).
  • NAS1756 approved warning streamer with part number identification.
  • Fits all Rosemount Model 102 Configuration B and Model 102 NDI Fuselage mounted TAT sensors.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

FTC-102A Total Air Temperature Sensor Cover

A flame-resistant protective cover that eliminates potential damage to the total air temperature sensor. The cover provides protection from water, debris, and wind damage. Boeing and Rosemount tested and approved.

  • DuPont™ Nomex® construction.
  • Temperature tolerance of 800°F.
  • Flame retardant (does not melt).
  • Water repellent / weather tolerant.
  • Metal free (soft flexibility ensures a tight fit without scratching the sensor).
  • NAS1756 approved warning streamer with part number identification.
  • Fits all Rosemount Model 101 and 102 Configuration A Fuselage mounted TAT sensors.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

FTC-102EP, TAT Cover (Enhanced Performance)

A flame-resistant protective cover that eliminates potential damage to the total air temperature sensor. The cover provides protection from water, debris, and wind damage.

  • DuPont™ Nomex® construction.
  • Temperature tolerance of 800°F.
  • Flame retardant (does not melt).
  • Water repellent / weather tolerant.
  • Metal free (soft flexibility ensures a tight fit without scratching the sensor).
  • NAS1756 approved warning streamer with part number identification.
  • Fits all Rosemount Model EPTAT Fuselage-mounted TAT sensors.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

NEISC-1, DuPont™ Nomex® Engine Inlet Sensor Cover

A flame-resistant protective cover that eliminates potential damage to the total air temperature sensor. The cover also protects the sensor from water, debris, and wind damage. Specifically designed for the Rosemount Aerospace Model 154 sensors.

  • DuPont™ Nomex® construction.
  • Temperature tolerance of 800°F.
  • Flame retardant (does not melt).
  • Chemical / abrasion resistance.
  • Water repellent / weather tolerant.
  • Metal free (soft flexibility ensures a tight fit without scratching the sensor).
  • NAS1756 approved warning streamer with part number identification.
  • Fits Rosemount Aerospace Model 154 Sensors.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order

STC-129H Outside Air Temperature Sensor Cover

A flame-resistant protective cover that minimizes potential damage to the outside air temperature sensor. Designed to fit and protect the Rosemount Aerospace 129G and 129H sensors.

  • Prevents potential sensor damage during maintenance.
  • High temperature silicone construction.
  • Designed to fit the Rosemount 129G and 129H sensors.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
Contact To Order
Performance Level:
Gold

KPC6 Series Pitot Probe Covers

Our patented KPC6 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC6 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • High temperature silicone rubber molding for easy attachment to Sesame’s commercial lanyards.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC5 Series Pitot Probe Covers

The patented KPC5 pitot cover is designed to allow for ease of installation and removal for pitot probes that are just out of reach from ground level. Constructed of DuPont™ Kevlar®, other polyaramid components, and high temperature silicones, the patented KPC5 cover will provide exceptional protection of the pitot probe.

  • Multi-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Molded installation rod provides easy installation and removal of the pitot cover.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Platinum

KPC4T Series Pitot Probe Covers

The patented KPC4T series pitot probe covers are specifically designed to offer the ultimate in pitot probe and probe tip protection for aircraft utilizing the Collins Aerospace SmartProbe® Air Data System. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4T has an integrated probe tip protector for unparalleled performance.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 900° F / 482°C.
  • Heat test temperature of 1,275°F / 691°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Removal loop.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Gold

KPC4 Series Pitot Probe Covers

Our patented KPC4 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC4 cover will provide exceptional protection of the pitot probe.

  • Triple-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 850° F / 454°C.
  • Heat test temperature of 1,150°F / 621°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellant lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom .
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Performance Level:
Silver

KPC3 Series Pitot Probe Covers

Our KPC3 series pitot probe cover is made to fit all commercial, military, and business aircraft. Constructed of DuPont™ Kevlar® and other polyaramid components, the KPC3 cover will provide exceptional protection of the pitot probe.

  • Single-layered DuPont™ Kevlar® construction will not scratch or damage the probe.
  • Working temperature of 800° F / 427°C.
  • Heat test temperature of 1,050°F / 566°C.
  • Tight fit, factory set pull off resistance tested.
  • Flame-retardant (does not melt).
  • Water repellent lamina.
  • Chemical/Abrasion resistance.
  • Metal-free/Low particulate.
  • Installation and removal loops.
  • Pole installable and removable.
  • NAS1756 approved warning streamer with part number identification.
  • Manufactured in an ISO Class 8 cleanroom.
  • Manufactured under ISO 9001 and AS9100D quality assurance requirements.
  • Meets CFR 25.853 requirements, test data is available upon request.
  • IPC supplement is available upon request.
  • NSN assignment numbers available upon request.
  • Please contact Sesame Technologies or your local distributor for product fitment information.
Contact to Order
Executive Products | Sesame Technologies, Inc.
Contact to Order
MW75 Neuro | Neurable